INTERESTED IN SPRAY CELLULOSE?

Wall Spray Cellulose is a system of applying cellulose insulation with the introduction of moisture. This application is used to fill open stud cavities prior to the installation of dry-wall. The insulation is self-supporting and for this type of insulation no netting or other support is necessary.

R-Pro provides a product that is specially manufactured for spray application. Loose-fill cellulose insulation is not manufactured for a wet spray application and cannot be used.

Cellulose insulation is a recycled fiber product mixed with powdered adhesive and effective fire retardant. It is an earth friendly product and significantly reduces waste in landfills. The energy requirements to make cellulose are much less than other fiberglass or other popular insulation materials. It contains more than 75% recycled material.

Cellulose meets or exceeds all national building codes!

Ten inches of cellulose will have a R-value of about R-38, regardless of density. Cellulose is two or three times denser than fiberglass products.

It won't burn! Because of its fire retardant treatment, it has been shown to inhibit the spread and speed of fire.

It contains no fiberglass or asbestos. It is totally non-toxic.

It is very effective at controlling sound transmission and has a noice reduction coefficient k(NCR) of 0.90 or 90% of sound energy absorbed.

It is completely ready for dry wall installation 24 hours after its application. All overspray is completely vacuumed up.

For more information, click here for our Unbeatable Continuous Comfort Brochure. Size: 636k uses Adobe Acrobat Reader.